12
1w
5

muusemuuse in linux

cannot get nut to load on reboot

I set up NUT on my server to monitor the status of 2 UPS's connected via USB, an eaton and a cyberpower. Nut fires up fine when I tell systemd to run all the pieces, but when I reboot, they are active but dead. they dont wake up and work until I manually load them again.

Theres no error anywhere. it just wont load itself on boot. why?

JasonDJ @lemmy.zip - 1w

Its common, it's called the refractory period. Younger men can sometimes go a couple minutes after a "reboot" but as you get older it takes longer and longer.

ETA: maybe I should read past the topic...

10
JASN_DE - 1w

Checked your journal?

3
muusemuuse @sh.itjust.works - 1w
sean@hooty:~$ systemctl status nut-driver@printerUPS.service
○ nut-driver@printerUPS.service - Network UPS Tools - device driver for NUT device 'printerUPS'
     Loaded: loaded (/usr/lib/systemd/system/nut-driver@.service; enabled; preset: disabled)
    Drop-In: /usr/lib/systemd/system/service.d
             └─10-timeout-abort.conf
             /etc/systemd/system/nut-driver@printerUPS.service.d
             └─nut-driver-enumerator-generated-checksum.conf, nut-driver-enumerator-generated-devicename.conf, nut-driver-enumerator-genera>
             /etc/systemd/system/nut-driver@.service.d
             └─override.conf
     Active: inactive (dead)
       Docs: man:upsdrvsvcctl(8)
             https://www.networkupstools.org/historic/v2.8.4/docs/man/upsdrvsvcctl.html
             man:ups.conf(5)
             https://www.networkupstools.org/historic/v2.8.4/docs/man/ups.conf.html
             man:nut.conf(5)
             https://www.networkupstools.org/historic/v2.8.4/docs/man/nut.conf.html
             man:usbhid-ups(8)
             https://www.networkupstools.org/historic/v2.8.4/docs/man/usbhid-ups.html
3
just_another_person @lemmy.world - 1w
  1. You need to enable debug logging for NUT
  2. Run systemctl --failed and see if you get anything there
  3. Make sure you run the journal back all the way through boot and see if anything during boot time is obvious
  4. Post your systems units here
3