14
5mon
36
5mon
Remote devices has advertised your public key
cross-posted from: https://sub.community/post/17678
Remote device Cleric Repeater has advertised your public key. This may indicate a low-entropy key. You may need to regenerate your public keys.
What should I do?
23
5mon
WisMesh Board ONE allows you to build a custom Meshtastic Node with OLED, GPS, battery, enclosure, and more
https://www.cnx-software.com/2025/07/03/wismesh-board-one-build-a-custom-meshtastic-node/97
5mon
Joseph DiGiovanni's Magtastic Literally Sticks a Meshtastic Node on the Back of Your Phone
https://www.hackster.io/news/joseph-digiovanni-s-magtastic-literally-sticks-a-meshtastic-node-on-the-back-of-your-phone-c8a2e6b34ead4
6mon
Issue with powerful RA-01S-P (29dB) LoRa Module
https://github.com/gargomoma/fakeTec_pcb/issues/37#issuecomment-3006012142Hey everyone ! ... read full post
6
6mon
Issue with powerful RA-01S-P (29dB) LoRa Module
https://github.com/gargomoma/fakeTec_pcb/issues/37#issuecomment-3006012142Hey everyone ! ... read full post
14
6mon
Seeed Studio Targets Easy Meshtastic Tracking with the Wio Tracker L1 Pro
https://www.hackster.io/news/seeed-studio-targets-easy-meshtastic-tracking-with-the-wio-tracker-l1-pro-502a40285c8c34
6mon
Critical Meshtastic Flaw Allows Attackers to Decrypt Private Messages
https://gbhackers.com/critical-meshtastic-flaw/Meshtastic developers released firmware version 2.6.11 with critical fixes: ... read full post
7
6mon
Up time as a vulnerability?
So I just noticed that my local router has been up for 170 days. It has the public-private key cryptography introduced in version 2.5 because it has the lock icon. But since it's been up for 170 days, I know for a fact that it does not have version 2.6 at all, and there was two key issues fixed in 2.6.3(ish and 2.6.11.
12
6mon
Huge difference between identical¹ Meshtastic antennae (Lorawan 915MHz)
https://youtu.be/xz64nPeKJR816
6mon
Map Remote ID-enabled drones with ESP32-C3/S3 and Meshtastic LoRa modules
https://www.cnx-software.com/2025/06/05/map-remote-id-enabled-drones-with-esp32-c3-s3-and-meshtastic-lora-modules/13
7mon
New user
Hey all, sorry for the probably dumb question but I am new to this and don't want to blow a board....
I have a rak 19007 board powered by a lipo. My question is if I need to disconnect the battery to charge it? Or can I just leave it hooked up, add power via USB c or solar, and have everything work ok (battery charged and then device is powered by the external source)?
20
7mon
ThinkNode M2 ESP32-S3-based Meshtastic handset features 1.3-inch OLED display, 1,000 mAh battery
https://www.cnx-software.com/2025/05/11/thinknode-m2-esp32-s3-meshtastic-handset-features-1-3-inch-oled-display-1000-mah-battery/37
7mon
OpenEmbed's MeshWalkie Is a Meshstastic-Compatible Replacement Brain for the Boafeng UV-K6
https://www.hackster.io/news/openembed-s-meshwalkie-is-a-meshstastic-compatible-replacement-brain-for-the-boafeng-uv-k6-c7bc2e09957b16
7mon
MeshSense Global Map
https://meshsense.affirmatech.com/Ive been having fun with this software for a bit. Anyone have a list of other software they like to use for meshtastic (other than the official client)?
23
8mon
Reticulum Network on any device
https://github.com/markqvist/ReticulumI heard an Talk about this. And wanna try this on an Connection between LoRadevice and Wifi and an old smartphone. When i have Time.
41
8mon
Can Meshtastic Radios Revive the Charm of Old School Bullletin Board Systems?
https://spectrum.ieee.org/run-a-meshtastic-bbs5
8mon
Buzzer Notifications
Hi, I added a buzzer to my RPI pico w, T3S3 and T-Beam Supreme and the RPI and T3S3 do beep during startup and the T3S3 seems to beep on some messages but not when I send a direct bell signal or message. Is there a better documentation explaining what options di what? I can’t get it work.
8
8mon
Replacing connector on battery
Hey all, ... read full post
31
8mon
CN Tower repeater expected to go live today
https://www.reddit.com/r/meshtasticToronto/s/qzYIkfMGpXcross-posted from: https://lemmy.ca/post/42400858 ... read full post
11
8mon
External antenna for Heltec T114
Question about antennas. Is there a limit regarding size of an antenna that can be used on a device like the heltec t114?
For example, I have a old 8ft Lora Antenna that was used for the helium network at one point
33
8mon
yo, check out the new heltec MeshPocket Qi2 power bank and meshtastic node
https://heltec.org/project/meshpocket/It comes in 5,000 mAh and 10,000 mAh variants and will use 95% of the battery in power bank mode and reserve the bottom 5% to run the mesh node. I think you can run the mesh node and use all 100% of the battery if you wish, but the power bank mode can only use 95% of it. I think it's based on the NRF52 and SX1262 radio. ... read full post
20
8mon
Meshtastic is city approved? New hardware and protests - Meshtastic News March 2025
https://youtu.be/6SXUPfYBAgA24
8mon
MeshPocket Qi2 Magnetic Charging Power Bank, Meshtastic Compatible [Pre-Sale]
https://heltec.org/project/meshpocket/cross-posted from: https://lemmy.ca/post/41765246
Well this is interesting. Stick-a-node to any smartphone with magnetic back. I could see myself trying this.
66
8mon
A little story about my first experiences with Meshtastic
I recently purchased a Heltec V3 and a Heltec T114 to start tinkering with and get more familiar with. I was also interested in seeing if I can make contact with any other nodes nearby. It turns out i'm all alone out here, at least that's what I thought. ... read full post